- 4E\/4C: Water Supply Problems<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for 4E\/4C Errors:<\/a><\/li><\/ul><\/li>
- 5E\/SE: Drainage Issues<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for 5E\/SE Issues:<\/a>
- Check the Drain Hose:<\/a><\/li>
- Inspect the Debris Filter:<\/a><\/li>
- Test the Drain Pump:<\/a><\/li>
- Assess the Washing Machine’s Level:<\/a><\/li>
- Monitor for Code Recurrence:<\/a><\/li><\/ul><\/li><\/ul><\/li>
- ND: No Drain Error<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for ND Error:<\/a><\/li><\/ul><\/li>
- UE: Unbalanced Load<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for UE Error:<\/a>
- Redistribution of Clothes:<\/a><\/li>
- Check for Overloading:<\/a><\/li>
- Single Heavy Items:<\/a><\/li>
- Adjusting the Feet:<\/a><\/li>
- Inspect the Drum and Suspension:<\/a><\/li>
- Perform a Calibration Cycle:<\/a><\/li><\/ul><\/li><\/ul><\/li>
- DC: Unbalanced Dryer Load<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for DC Error:<\/a>
- Rearrange the Drying Load:<\/a><\/li>
- Avoid Overloading the Dryer:<\/a><\/li>
- Balance the Drum:<\/a><\/li>
- Check the Dryer’s Position:<\/a><\/li>
- Reduce Mixed Fabric Loads:<\/a><\/li>
- Utilize Dryer Balls or Sheets:<\/a><\/li>
- Reset or Recalibrate the Dryer:<\/a><\/li><\/ul><\/li><\/ul><\/li>
- OE\/DE: Door Lock Issues<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for OE\/DE Issues:<\/a>
- Examine the Door Latch:<\/a><\/li>
- Check the Door Seal:<\/a><\/li>
- Inspect Electrical Connections:<\/a><\/li>
- Test the Door Lock Mechanism:<\/a><\/li>
- Replace Faulty Parts:<\/a><\/li>
- Reset the Machine:<\/a><\/li><\/ul><\/li><\/ul><\/li>
- LE\/E9: Motor Problem<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for LE\/E9 Error:<\/a>
- Inspect the Motor:<\/a><\/li>
- Check the Motor’s Electrical Connections:<\/a><\/li>
- Assess the Motor Control Board:<\/a><\/li>
- Look for Obstructions:<\/a><\/li>
- Test Capacitors:<\/a><\/li>
- Consider Motor Replacement:<\/a><\/li><\/ul><\/li><\/ul><\/li>
- HE\/Temperature Sensor Malfunction<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for HE Issues:<\/a>
- Here’s how I approach the situation:<\/a><\/li>
- Follow Safety Protocols:<\/a><\/li><\/ul><\/li><\/ul><\/li>
- Excessive Suds (SUD)<\/a>
- Troubleshooting Steps:<\/a><\/li>
- In-Depth Troubleshooting for SUD Issues:<\/a><\/li>
- In-Depth Troubleshooting for SUD Issues:<\/a>
- Assess Detergent Usage:<\/a><\/li>
- Detergent Type and Washer Compatibility:<\/a><\/li>
- Inspect the Drum and Drainage System:<\/a><\/li>
- Run a Cleaning Cycle:<\/a><\/li>
- Check for Mechanical Faults:<\/a><\/li><\/ul><\/li><\/ul><\/li><\/ul><\/div><\/div><\/div>\n\n\n
Here’s a quick reference to the top error codes you might encounter and how to handle them effectively.<\/p>\n\n\n\n
Samsung Washer Error Codes<\/strong><\/p>\n\n\n\n
4E\/4C: Water Supply Problems<\/h2>\n\n\n\n
What It Means:<\/strong> The machine detects a water supply issue.<\/p>\n\n\n\n
Troubleshooting Steps:<\/strong><\/h3>\n\n\n\n
- \n
- Ensure the water supply faucets are fully turned on.<\/li>\n\n\n\n
- Check the water inlet hoses for kinks or bends.<\/li>\n<\/ul>\n\n\n\n
In-Depth Troubleshooting for 4E\/4C Errors:<\/strong><\/h3>\n\n\n\n
Here are the in-depth steps for you to follow:<\/p>\n\n\n\n
- \n
- Check Water Pressure:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- Use a water pressure gauge on your faucet to confirm that your household water pressure is between 20 and 116 psi. If it’s lower than 20 psi, the washer may fail to fill adequately.<\/li>\n<\/ul>\n\n\n\n
- \n
- Inspect the Inlet Filters:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- I found that removing the water hose from the back of the washer and cleaning the inlet filters of any buildup of sediment greatly improved the water flow.<\/li>\n<\/ul>\n\n\n\n
- \n
- Straighten Hoses:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- Make sure there are no twists or extreme bends in the hoses that could restrict water flow.<\/li>\n<\/ul>\n\n\n\n
- \n
- Conduct a Cleaning Cycle:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- Over time, small particles can build up inside the machine. Running a cleaning cycle without clothes can help flush out any debris that might be causing a hindrance.<\/li>\n<\/ul>\n\n\n\n
Remember, safety first: always disconnect the power before performing these checks.<\/p>\n\n\n\n
![\"Samsung](\"https:\/\/diyhouseskills.com\/wp-content\/uploads\/2024\/02\/Samsung-Washer-Error-Codes-edited.webp\")
<\/figure>\n\n\n\n5E\/SE: Drainage Issues<\/h2>\n\n\n\n
What It Means:<\/strong> The washer fails to drain properly.<\/p>\n\n\n\n
Troubleshooting Steps:<\/strong><\/h3>\n\n\n\n
- \n
- Examine the drain hose for any clogs or pinches.<\/li>\n\n\n\n
- Verify that your household plumbing allows proper water flow.<\/li>\n<\/ul>\n\n\n\n
In-Depth Troubleshooting for 5E\/SE Issues:<\/strong><\/h3>\n\n\n\n
Here\u2019s how we can tackle these drainage problems:<\/p>\n\n\n\n
Check the Drain Hose:<\/strong><\/h4>\n\n\n\n
- \n
- First, I always suggest ensuring the drain hose is properly installed. The hose should not be inserted more than 6 inches into the drainage pipe. Also, look for any kinks or obstructions inside the hose that may impede water flow.<\/li>\n<\/ul>\n\n\n\n
Inspect the Debris Filter:<\/strong><\/h4>\n\n\n\n
- \n
- Regular maintenance includes checking the debris filter, which is often located at the front lower part of the washer. I’ve found through my own experience that cleaning out lint and small items from the filter can prevent a lot of drainage headaches.<\/li>\n<\/ul>\n\n\n\n
Test the Drain Pump:<\/strong><\/h4>\n\n\n\n
- \n
- If your washer is humming or making unusual noises, the drain pump might be clogged or defective. Safely accessing and inspecting the pump for obstacles could be your next step. If needed, consulting with a professional or involving Samsung\u2019s customer service may be prudent.<\/li>\n<\/ul>\n\n\n\n
Assess the Washing Machine’s Level:<\/strong><\/h4>\n\n\n\n
- \n
- Sometimes the simplest things can cause the biggest troubles. Check to ensure your washer is level because an uneven washer can lead to improper draining.<\/li>\n<\/ul>\n\n\n\n
Monitor for Code Recurrence:<\/strong><\/h4>\n\n\n\n
- \n
- After taking these steps, try running your machine again to see if the error persists. If it does, documenting when and how it occurs can offer helpful clues for further troubleshooting or when discussing the issue with a technician.<\/li>\n<\/ul>\n\n\n\n
Please make sure to disconnect from power before attempting any troubleshooting, and don’t hesitate to reach out to a professional if you’re in over your head. Your safety is paramount.<\/p>\n\n\n\n
ND: No Drain Error<\/h2>\n\n\n\n
What It Means:<\/strong> An extended drain time is detected.<\/p>\n\n\n\n
Troubleshooting Steps:<\/strong><\/h3>\n\n\n\n
- \n
- Clean the drain pump filter and inspect the impeller.<\/li>\n\n\n\n
- Ensure the drain hose is not bent or blocked.<\/li>\n<\/ul>\n\n\n\n
In-Depth Troubleshooting for ND Error:<\/strong><\/h3>\n\n\n\n
When facing the ND error on your Samsung front-load washer, it’s a signal to check the drainage system meticulously.<\/p>\n\n\n\n
- \n
- Examine the Drain Pump Filter:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- I always start by checking the drain pump filter for any obstructions. In my experience, a clogged filter is a common culprit. To get to the filter, you’ll need to remove the panel at the front bottom of the washer (ensure the machine is off and unplugged before you do this). Clean out the filter thoroughly and rinse it under running water.<\/li>\n<\/ul>\n\n\n\n
- \n
- Check Impeller Functionality:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- While the filter is off, take a moment to verify that the impeller, which is the fan-like component behind the filter, can rotate freely. If it’s stuck, gently remove any obstructions with a pair of tweezers.<\/li>\n<\/ul>\n\n\n\n
- \n
- Straighten and Inspect the Drain Hose:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- A bent or blocked drain hose can also cause the ND error. Ensure the hose is straight and free of kinks. You might have to disconnect it to give it a good check\u2014it’s sometimes as simple as removing a small sock or a buildup of lint hiding in the hose!<\/li>\n<\/ul>\n\n\n\n
- \n
- Use Water to Detect Blockages:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- An effective method I\u2019ve adopted involves detaching the hose from the back and then running water through it. If water flows freely, it’s clear; if not, there’s a blockage that needs your attention.<\/li>\n<\/ul>\n\n\n\n
- \n
- Verify Hose Installation:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- Ensure the drain hose is securely and correctly attached to your home’s plumbing and that it\u2019s not pushed too far down the standpipe. This could lead to siphoning, which prevents proper draining.<\/li>\n<\/ul>\n\n\n\n
- \n
- Test the Drain Pump Electricals:<\/strong><\/li>\n<\/ol>\n\n\n\n
- \n
- Occasionally, the issue might be electrical and not mechanical. If you\u2019re comfortable using a multimeter, you can check the pump for electrical continuity to ensure it’s functioning properly. Be mindful that this step is best left to professionals if you’re not familiar with electrical systems.<\/li>\n<\/ul>\n\n\n\n
- Test the Drain Pump Electricals:<\/strong><\/li>\n<\/ol>\n\n\n\n
- Ensure the drain hose is securely and correctly attached to your home’s plumbing and that it\u2019s not pushed too far down the standpipe. This could lead to siphoning, which prevents proper draining.<\/li>\n<\/ul>\n\n\n\n
- Verify Hose Installation:<\/strong><\/li>\n<\/ol>\n\n\n\n
- An effective method I\u2019ve adopted involves detaching the hose from the back and then running water through it. If water flows freely, it’s clear; if not, there’s a blockage that needs your attention.<\/li>\n<\/ul>\n\n\n\n
- Use Water to Detect Blockages:<\/strong><\/li>\n<\/ol>\n\n\n\n
- A bent or blocked drain hose can also cause the ND error. Ensure the hose is straight and free of kinks. You might have to disconnect it to give it a good check\u2014it’s sometimes as simple as removing a small sock or a buildup of lint hiding in the hose!<\/li>\n<\/ul>\n\n\n\n
- Straighten and Inspect the Drain Hose:<\/strong><\/li>\n<\/ol>\n\n\n\n
- While the filter is off, take a moment to verify that the impeller, which is the fan-like component behind the filter, can rotate freely. If it’s stuck, gently remove any obstructions with a pair of tweezers.<\/li>\n<\/ul>\n\n\n\n
- Check Impeller Functionality:<\/strong><\/li>\n<\/ol>\n\n\n\n
- I always start by checking the drain pump filter for any obstructions. In my experience, a clogged filter is a common culprit. To get to the filter, you’ll need to remove the panel at the front bottom of the washer (ensure the machine is off and unplugged before you do this). Clean out the filter thoroughly and rinse it under running water.<\/li>\n<\/ul>\n\n\n\n
- Examine the Drain Pump Filter:<\/strong><\/li>\n<\/ol>\n\n\n\n
- After taking these steps, try running your machine again to see if the error persists. If it does, documenting when and how it occurs can offer helpful clues for further troubleshooting or when discussing the issue with a technician.<\/li>\n<\/ul>\n\n\n\n
- Sometimes the simplest things can cause the biggest troubles. Check to ensure your washer is level because an uneven washer can lead to improper draining.<\/li>\n<\/ul>\n\n\n\n
- If your washer is humming or making unusual noises, the drain pump might be clogged or defective. Safely accessing and inspecting the pump for obstacles could be your next step. If needed, consulting with a professional or involving Samsung\u2019s customer service may be prudent.<\/li>\n<\/ul>\n\n\n\n
- Regular maintenance includes checking the debris filter, which is often located at the front lower part of the washer. I’ve found through my own experience that cleaning out lint and small items from the filter can prevent a lot of drainage headaches.<\/li>\n<\/ul>\n\n\n\n
- First, I always suggest ensuring the drain hose is properly installed. The hose should not be inserted more than 6 inches into the drainage pipe. Also, look for any kinks or obstructions inside the hose that may impede water flow.<\/li>\n<\/ul>\n\n\n\n
- Over time, small particles can build up inside the machine. Running a cleaning cycle without clothes can help flush out any debris that might be causing a hindrance.<\/li>\n<\/ul>\n\n\n\n
- Conduct a Cleaning Cycle:<\/strong><\/li>\n<\/ol>\n\n\n\n
- Make sure there are no twists or extreme bends in the hoses that could restrict water flow.<\/li>\n<\/ul>\n\n\n\n
- Straighten Hoses:<\/strong><\/li>\n<\/ol>\n\n\n\n
- I found that removing the water hose from the back of the washer and cleaning the inlet filters of any buildup of sediment greatly improved the water flow.<\/li>\n<\/ul>\n\n\n\n
- Inspect the Inlet Filters:<\/strong><\/li>\n<\/ol>\n\n\n\n
- Use a water pressure gauge on your faucet to confirm that your household water pressure is between 20 and 116 psi. If it’s lower than 20 psi, the washer may fail to fill adequately.<\/li>\n<\/ul>\n\n\n\n
- Check Water Pressure:<\/strong><\/li>\n<\/ol>\n\n\n\n
- Detergent Type and Washer Compatibility:<\/a><\/li>
- In-Depth Troubleshooting for SUD Issues:<\/a><\/li>
- Follow Safety Protocols:<\/a><\/li><\/ul><\/li><\/ul><\/li>
- In-Depth Troubleshooting for HE Issues:<\/a>
- Check the Motor’s Electrical Connections:<\/a><\/li>
- In-Depth Troubleshooting for LE\/E9 Error:<\/a>
- Check the Door Seal:<\/a><\/li>
- In-Depth Troubleshooting for OE\/DE Issues:<\/a>
- Avoid Overloading the Dryer:<\/a><\/li>
- In-Depth Troubleshooting for DC Error:<\/a>
- Check for Overloading:<\/a><\/li>
- In-Depth Troubleshooting for UE Error:<\/a>
- In-Depth Troubleshooting for ND Error:<\/a><\/li><\/ul><\/li>
- Inspect the Debris Filter:<\/a><\/li>
- In-Depth Troubleshooting for 5E\/SE Issues:<\/a>
- In-Depth Troubleshooting for 4E\/4C Errors:<\/a><\/li><\/ul><\/li>
- Troubleshooting Steps:<\/a><\/li>